Chopping silage during rapid drying conditions always bring up the question of “How much water do I add?” The short answer: It is practically impossible to add enough to get to your desired moisture level.
To add one point of moisture for each ton of silage you would need to add seven gallons. For example, if the silage was 55% moisture, you would need to add 70 gallons of water per ton of silage. That would calculate out to be 16,520 gallons of water for a 9’x200’ silage bag.
The big challenge with dry corn silage is heating, which allows mold to grow. Proper packing is critical and it is highly recommended to cover with plastic as soon as possible for bunker storage. Consider chopping finer and using a kernel processor if possible, to allow for better packing.
If you do need to add water, try to apply as evenly as possible with a spray bar to get better adsorption. When adding water to silage in bunker silos, add water evenly to wagons prior to unloading. When using silos or bags, add water at the blower or bagger location.
Links to this article are strongly encouraged, and this article may be republished without further permission if published as written and if credit is given to the author, Integrated Crop Management News, and Iowa State University Extension and Outreach. If this article is to be used in any other manner, permission from the author is required. This article was originally published on August 25, 2020. The information contained within may not be the most current and accurate depending on when it is accessed.
- Field Agronomist in SW Iowa